DSX | End Work Maintenance

May 06, 2021

This video will outline the Neogen® recommended end of work maintenance for a Dynex DSX instrument.

Video Transcript


Upon completion of your instrumental runs, wipe the pipettor with 70% alcohol solution in order to wipe away any contaminant from the pipetting arm.

Clean and disinfect the DSX work surface with 70% alcohol solution to prevent any contamination.

Empty the tip waste container if needed.

If the tips were used to pipette biohazards like blood or urine, be sure to empty the tips into an approved biohazard disposal container.

If needed, clean and disinfect the container.

Empty and clean the liquid waste container if needed with DI water by rinsing the tank three to five times.